Four Leaf fishpacking plant terminals

From The Vault - Fallout Wiki
Jump to: navigation, search
 
Gametitle-FO4.png
Gametitle-FO4.png

This page presents the content of the terminals within the Four Leaf fishpacking plant as is in game.

Terminal[edit | edit source]

Note: This desk terminal is located on the desk at the western end of the min floor of the assembly line, next to the locked cage. It is locked Novice.

TranscriptVaultBoy.png

Welcome to ROBCO Industries (TM) Termlink

The following section is transcluded from Protectron terminal (Fallout 4). To modify, please edit the source page.

> Protectron Control[edit | edit source]

Note: This is the default header of the command program.

TranscriptVaultBoy.png

Standard Protectron Control Interface v2.40

This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.

STATUS: Unit(s) Charging/Inactive
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal

Please choose an option:

TranscriptVaultBoy.png

> Loading Interface...

Note: This is the header of the command program once the Protectron(s) is active.

TranscriptVaultBoy.png

Standard Protectron Control Interface v2.40

This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.

STATUS: Unit(s) Patrolling/Active
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal

Please choose an option:

TranscriptVaultBoy.png

> Loading Interface...

Note: This is the header of the command program once the Protectron(s) is xxxxx.

TranscriptVaultBoy.png

Standard Protectron Control Interface v2.40

This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.

STATUS: Unit(s) BUSY
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal

Please choose an option:

TranscriptVaultBoy.png

> Loading Interface...

Note: This header of the command program is displayed once the Protectron(s) is no longer within the protectron pod.

TranscriptVaultBoy.png

 ! ERROR ! !
Protectron unit absent or damaged!

TranscriptVaultBoy.png

> Loading Interface...

Activate Unit(s)[edit | edit source]

Note: This is the default command of the command program.

TranscriptVaultBoy.png

...Accessing pod...
...Initializing unit...
...Loading assigned subroutines...

Please advise any personnel standing near charge pod to make way.

TranscriptVaultBoy.png

> Exiting Charge Pod

Shut-Down Unit(s)[edit | edit source]

Note: This command is available once the Protectron(s) are activated.

TranscriptVaultBoy.png

...Accessing pod...
...Pinging Protectron Unit...
...Broadcasting shut-down signal...

Please ensure that Charge Pod is unobstructed.

TranscriptVaultBoy.png

> Returning to Charge Pod

Choose Personality Mode[edit | edit source]

TranscriptVaultBoy.png

> Loading Personality Matrices...

Default[edit | edit source]
TranscriptVaultBoy.png

Personality paramenter reset.

TranscriptVaultBoy.png

> Resetting Personality Parameter...

Subway Steward[edit | edit source]
TranscriptVaultBoy.png

Personality paramenter reset.

TranscriptVaultBoy.png

> Resetting Personality Parameter...

Law Enforcement[edit | edit source]
TranscriptVaultBoy.png

Personality paramenter reset.

TranscriptVaultBoy.png

> Resetting Personality Parameter...

Fire Brigadier[edit | edit source]
TranscriptVaultBoy.png

Personality paramenter reset.

TranscriptVaultBoy.png

> Resetting Personality Parameter...

Medical Responder[edit | edit source]
TranscriptVaultBoy.png

Personality paramenter reset.

TranscriptVaultBoy.png

> Resetting Personality Parameter...

Construction Worker[edit | edit source]
TranscriptVaultBoy.png

Personality paramenter reset.

TranscriptVaultBoy.png

> Resetting Personality Parameter...

The following section is transcluded from security door control. To modify, please edit the source page.
Creation Kit ID
nativeSwitchDoorTerminal

> Security Door Control[edit | edit source]

Creation Kit ID
nativeSwitchDoorTerminalSubMenu

Note: This header is displayed if door(s) are locked.

Note: This header is displayed if the door is opening.

TranscriptVaultBoy.png

MaxLock Security Door Control Interface
STATUS: Busy

Note: This header is displayed if door(s) are unlocked.

TranscriptVaultBoy.png

MaxLock Security Door Control Interface
STATUS: Unlocked

Open Door[edit | edit source]

Note: This notice is displayed if the command opens a single door.

TranscriptVaultBoy.png

Security lock released. Opening doors...

TranscriptVaultBoy.png

> Accessing Maglocks...

Note: This notice is displayed if the command opens multiple doors.

TranscriptVaultBoy.png

Security locks released. Opening doors...

Close Door[edit | edit source]

Note: This notice is displayed if the command closes a single door.

TranscriptVaultBoy.png

Security lock engaged. Sealing doors...

Note: This notice is displayed if the command closes multiple doors.

TranscriptVaultBoy.png

Security locks engaged. Sealing doors...

TranscriptVaultBoy.png

> Initializing Maglocks...

Terminal[edit | edit source]

Note: This wall terminal is located on the balcony above the main entrance of the facility. It is locked Master, although it can also be access with the Four Leaf security password.

TranscriptVaultBoy.png

Welcome to ROBCO Industries (TM) Termlink

TranscriptVaultBoy.png

==============================================
Four Leaf Fishpacking Security Terminal
==============================================

Open Security Door[edit | edit source]

Note: Accessing this command opens the hidden door to Marowski's Chem Lab.

Close Security Door[edit | edit source]

Note: Accessing this command closes the hidden door to Marowski's Chem Lab.

Terminal[edit | edit source]

Note: This wall terminal is located on the western wall of Marowski's Chem Lab.

TranscriptVaultBoy.png

Welcome to ROBCO Industries (TM) Termlink

The following section is transcluded from remote door control terminal (Fallout 4). To modify, please edit the source page.

> Remote Door Control[edit | edit source]

Note: This is the default header for the remote door program.

TranscriptVaultBoy.png

Remote Door Control Interface
STATUS: Closed

Note: This is the header once the remote door is opened.

TranscriptVaultBoy.png

Remote Door Control Interface
STATUS: Open

Open Door[edit | edit source]

TranscriptVaultBoy.png

Opening doors...

TranscriptVaultBoy.png

> Accessing Door...

Close Door[edit | edit source]

TranscriptVaultBoy.png

Sealing doors...

TranscriptVaultBoy.png

> Initializing Door...