Haymarket Mall terminals

From The Vault - Fallout Wiki
Jump to: navigation, search
 
Gametitle-FO4.png
Gametitle-FO4.png

This page presents the content of the terminals within the Haymarket Mall as is in game.

Security Terminal[edit | edit source]

Note: This desk terminal is located on the desk next to the protectron pods, in the security office on the first floor. It is locked Advanced.

TranscriptVaultBoy.png

Welcome to ROBCO Industries (TM) Termlink
Haymarket Mall - Security Office

The following section is transcluded from Protectron terminal (Fallout 4). To modify, please edit the source page.

> Protectron Control[edit | edit source]

Note: This is the default header of the command program.

TranscriptVaultBoy.png

Standard Protectron Control Interface v2.40

This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.

STATUS: Unit(s) Charging/Inactive
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal

Please choose an option:

TranscriptVaultBoy.png

> Loading Interface...

Note: This is the header of the command program once the Protectron(s) is active.

TranscriptVaultBoy.png

Standard Protectron Control Interface v2.40

This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.

STATUS: Unit(s) Patrolling/Active
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal

Please choose an option:

TranscriptVaultBoy.png

> Loading Interface...

Note: This is the header of the command program once the Protectron(s) is xxxxx.

TranscriptVaultBoy.png

Standard Protectron Control Interface v2.40

This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.

STATUS: Unit(s) BUSY
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal

Please choose an option:

TranscriptVaultBoy.png

> Loading Interface...

Note: This header of the command program is displayed once the Protectron(s) is no longer within the protectron pod.

TranscriptVaultBoy.png

 ! ERROR ! !
Protectron unit absent or damaged!

TranscriptVaultBoy.png

> Loading Interface...

Activate Unit(s)[edit | edit source]

Note: This is the default command of the command program.

TranscriptVaultBoy.png

...Accessing pod...
...Initializing unit...
...Loading assigned subroutines...

Please advise any personnel standing near charge pod to make way.

TranscriptVaultBoy.png

> Exiting Charge Pod

Shut-Down Unit(s)[edit | edit source]

Note: This command is available once the Protectron(s) are activated.

TranscriptVaultBoy.png

...Accessing pod...
...Pinging Protectron Unit...
...Broadcasting shut-down signal...

Please ensure that Charge Pod is unobstructed.

TranscriptVaultBoy.png

> Returning to Charge Pod

Choose Personality Mode[edit | edit source]

TranscriptVaultBoy.png

> Loading Personality Matrices...

Default[edit | edit source]
TranscriptVaultBoy.png

Personality paramenter reset.

TranscriptVaultBoy.png

> Resetting Personality Parameter...

Subway Steward[edit | edit source]
TranscriptVaultBoy.png

Personality paramenter reset.

TranscriptVaultBoy.png

> Resetting Personality Parameter...

Law Enforcement[edit | edit source]
TranscriptVaultBoy.png

Personality paramenter reset.

TranscriptVaultBoy.png

> Resetting Personality Parameter...

Fire Brigadier[edit | edit source]
TranscriptVaultBoy.png

Personality paramenter reset.

TranscriptVaultBoy.png

> Resetting Personality Parameter...

Medical Responder[edit | edit source]
TranscriptVaultBoy.png

Personality paramenter reset.

TranscriptVaultBoy.png

> Resetting Personality Parameter...

Construction Worker[edit | edit source]
TranscriptVaultBoy.png

Personality paramenter reset.

TranscriptVaultBoy.png

> Resetting Personality Parameter...

The following section is transcluded from turret terminal (Fallout 4). To modify, please edit the source page.

> Turret Control[edit | edit source]

TranscriptVaultBoy.png

Standardized Turret Control Firmware v8.13
<Token.ValueInt=TurretsConnected> Units Connected.
ADMIN: <Token.Name=TurretFaction>

Please exercise caution. Always assume that turrets are loaded and capable of live-fire.

Please choose an option:

TranscriptVaultBoy.png

> Accessing Turret Functions...

Deactivate[edit | edit source]

Note: Accessing this command deactivates the turret(s) connected.

TranscriptVaultBoy.png

> Shutting Down

Activate[edit | edit source]

Note: Accessing this command activates the turret(s) connected.

TranscriptVaultBoy.png

> Activating

About your Defense System[edit | edit source]

TranscriptVaultBoy.png

Turret operation should be limited to trained professionals only.

Consumer commands are limited to activation/deactivation of the turret(s) hardlined to this terminal. For all other operations, please refer to a licensed technician.

Any tampering will void warranty and indemnify the manufacturer against potenial injury and/or death caused to users or passers-by.

TranscriptVaultBoy.png

> Loading Terms of Usage...

System Diagnostics[edit | edit source]

TranscriptVaultBoy.png

System Diagnostics: <Token.ValueInt=TurretsConnected> Turrets Linked
Node

Office Terminal[edit | edit source]

Note: This console terminal is located on the eighth floor, in the southeast computer cubicle. In front of the two protectron pods.

TranscriptVaultBoy.png

Welcome to ROBCO Industries (TM) Termlink
Haymarket Mall - Suite802

The following section is transcluded from Protectron terminal (Fallout 4). To modify, please edit the source page.

> Protectron Control[edit | edit source]

Note: This is the default header of the command program.

TranscriptVaultBoy.png

Standard Protectron Control Interface v2.40

This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.

STATUS: Unit(s) Charging/Inactive
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal

Please choose an option:

TranscriptVaultBoy.png

> Loading Interface...

Note: This is the header of the command program once the Protectron(s) is active.

TranscriptVaultBoy.png

Standard Protectron Control Interface v2.40

This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.

STATUS: Unit(s) Patrolling/Active
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal

Please choose an option:

TranscriptVaultBoy.png

> Loading Interface...

Note: This is the header of the command program once the Protectron(s) is xxxxx.

TranscriptVaultBoy.png

Standard Protectron Control Interface v2.40

This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.

STATUS: Unit(s) BUSY
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal

Please choose an option:

TranscriptVaultBoy.png

> Loading Interface...

Note: This header of the command program is displayed once the Protectron(s) is no longer within the protectron pod.

TranscriptVaultBoy.png

 ! ERROR ! !
Protectron unit absent or damaged!

TranscriptVaultBoy.png

> Loading Interface...

Activate Unit(s)[edit | edit source]

Note: This is the default command of the command program.

TranscriptVaultBoy.png

...Accessing pod...
...Initializing unit...
...Loading assigned subroutines...

Please advise any personnel standing near charge pod to make way.

TranscriptVaultBoy.png

> Exiting Charge Pod

Shut-Down Unit(s)[edit | edit source]

Note: This command is available once the Protectron(s) are activated.

TranscriptVaultBoy.png

...Accessing pod...
...Pinging Protectron Unit...
...Broadcasting shut-down signal...

Please ensure that Charge Pod is unobstructed.

TranscriptVaultBoy.png

> Returning to Charge Pod

Choose Personality Mode[edit | edit source]

TranscriptVaultBoy.png

> Loading Personality Matrices...

Default[edit | edit source]
TranscriptVaultBoy.png

Personality paramenter reset.

TranscriptVaultBoy.png

> Resetting Personality Parameter...

Subway Steward[edit | edit source]
TranscriptVaultBoy.png

Personality paramenter reset.

TranscriptVaultBoy.png

> Resetting Personality Parameter...

Law Enforcement[edit | edit source]
TranscriptVaultBoy.png

Personality paramenter reset.

TranscriptVaultBoy.png

> Resetting Personality Parameter...

Fire Brigadier[edit | edit source]
TranscriptVaultBoy.png

Personality paramenter reset.

TranscriptVaultBoy.png

> Resetting Personality Parameter...

Medical Responder[edit | edit source]
TranscriptVaultBoy.png

Personality paramenter reset.

TranscriptVaultBoy.png

> Resetting Personality Parameter...

Construction Worker[edit | edit source]
TranscriptVaultBoy.png

Personality paramenter reset.

TranscriptVaultBoy.png

> Resetting Personality Parameter...

The following section is transcluded from turret terminal (Fallout 4). To modify, please edit the source page.

> Turret Control[edit | edit source]

TranscriptVaultBoy.png

Standardized Turret Control Firmware v8.13
<Token.ValueInt=TurretsConnected> Units Connected.
ADMIN: <Token.Name=TurretFaction>

Please exercise caution. Always assume that turrets are loaded and capable of live-fire.

Please choose an option:

TranscriptVaultBoy.png

> Accessing Turret Functions...

Deactivate[edit | edit source]

Note: Accessing this command deactivates the turret(s) connected.

TranscriptVaultBoy.png

> Shutting Down

Activate[edit | edit source]

Note: Accessing this command activates the turret(s) connected.

TranscriptVaultBoy.png

> Activating

About your Defense System[edit | edit source]

TranscriptVaultBoy.png

Turret operation should be limited to trained professionals only.

Consumer commands are limited to activation/deactivation of the turret(s) hardlined to this terminal. For all other operations, please refer to a licensed technician.

Any tampering will void warranty and indemnify the manufacturer against potenial injury and/or death caused to users or passers-by.

TranscriptVaultBoy.png

> Loading Terms of Usage...

System Diagnostics[edit | edit source]

TranscriptVaultBoy.png

System Diagnostics: <Token.ValueInt=TurretsConnected> Turrets Linked
Node